Influence of different extraction methods on the cannabinoid profile in Cannabis sativa oil
DOI:
https://doi.org/10.34117/bjdv11n2-019Keywords:
Cannabis sativa, cannabinoid extraction, supercritical CO₂, therapeutic oilsAbstract
The research focuses on optimizing extraction methods for Cannabis sativa to ensure the production of high-quality oils with consistent cannabinoid profiles, critical for therapeutic applications. The study highlights the plant’s medicinal potential, driven by bioactive compounds such as cannabidiol (CBD) and tetrahydrocannabinol (THC), which are effective against various conditions, including epilepsy and chronic pain. The objective is to evaluate and compare advanced extraction techniques like supercritical CO₂, ethanol-based, and microwave-assisted extraction to identify methods that balance efficiency, yield, and sustainability. Upon exploration, the study reviewed scientific literature, analyzing efficiency metrics and cost-effectiveness across methods. Results underscore the superiority of supercritical CO₂ extraction for purity and pharmaceutical-grade standards but note its high cost. Ethanol-based techniques are cost-effective but require additional refinement. Microwave-assisted methods offer terpene preservation but lack scalability. These findings stress the need for hybrid techniques that integrate advantages while addressing limitations. The research concludes that standardization and technological innovations are essential to overcome inconsistencies in cannabinoid profiles, enhancing clinical and industrial viability. It advocates for interdisciplinary collaboration to improve extraction protocols, ensuring sustainable and effective use of Cannabis sativa in medicine.
References
AHSAN, S. M.; HOQUE, M. I. U.; SHAFFIQUE, S.; AYOOBI, A. et al. Illuminating Cannabis sativa L.: The power of light in enhancing C. sativa growth and secondary metabolite production. Plants, 13, p. 2774, 2024.
BARATTA, F.; SIMIELE, M.; PIGNATA, I.; RAVETTO, E. L. et al. Development of standard operating protocols for the optimization of Cannabis-based formulations for medical purposes. Front Pharmacol, 10, p. 701, 2019.
BLANDINIÈRES, H.; AMADUCCI, S. Adapting the cultivation of industrial hemp (Cannabis sativa L.) to marginal lands: A review. GCB Bioenergy, 14, p. 1004–1022, 2022.
BOFFA, L.; BINELLO, A.; CRAVOTTO, G. Efficient capture of cannabis terpenes in olive oil during microwave-assisted cannabinoid decarboxylation. Molecules, 29, n. 4, p. 899, 2024.
CALVI, L.; PENTIMALLI, D.; PANSERI, S.; GIUPPONI, L. et al. Comprehensive quality evaluation of medical Cannabis sativa L. inflorescence and macerated oils based on HS-SPME coupled to GC–MS and LC-HRMS (q-exactive orbitrap®) approach. J Pharm Biomed Anal, 150, p. 208–219, 2018.
CHACON, F. T.; RAUP-KONSAVAGE, W. M.; VRANA, K. E.; KELLOGG, J. J. Effect of hemp extraction procedures on cannabinoid and terpenoid composition. Plants, 13, p. 2222, 2024.
CHANDRA, S.; LATA, H.; KHAN, I. A.; ELSOHLY, M. A. Photosynthetic response of Cannabis sativa L. to variations in photosynthetic photon flux densities, temperature and CO2 conditions. Physiol Mol Biol Plants, 14, n. 4, p. 299–311, 2008.
DAVIDSON, M.; REED, S.; OOSTHUIZEN, J.; O’DONNELL, G. et al. Occupational health and safety in cannabis production: an Australian perspective. Int J Occup Environ Health, 24, n. 3-4, p. 75-85, 2018.
DE MEIJER, E. P.; BAGATTA, M.; CARBONI, A.; CRUCITTI, P. et al. The inheritance of chemical phenotype in Cannabis sativa L. Genetics, 163, n. 1, p. 335-346, 2003.
FRUSCIANTE, L.; GEMINIANI, M.; SHABAB, B.; OLMASTRONI, T. et al. Enhancing industrial hemp (Cannabis sativa) leaf by-products: Bioactive compounds, anti-inflammatory properties, and potential health applications. Int J Mol Sci, 26, p. 548, 2025.
GOSCINIAK, A.; KOCAJ, F.; STASIŁOWICZ-KRZEMIEŃ, A.; SZYMAŃSKI, M. et al. 3D Printed Bigel: A Novel Delivery System for Cannabidiol-Rich Hemp Extract. Gels, 10, n. 770, p. 1-20, 2024.
GOUVÊA-SILVA, J. G.; COSTA-OLIVEIRA, C.; RAMOS, Y. J.; MANTOVANELLI, D. F. et al. Is there enough knowledge to standardize a Cannabis sativa L. medicinal oil preparation with a high content of cannabinoids? Canna Cannabin Res, 8, n. 3, p. 476–486, 2023.
JAWED, B.; ESPOSITO, J. E.; PULCINI, R.; ZAKIR, S. K. et al. The evolving role of cannabidiol-rich Cannabis in people with autism spectrum disorder: A systematic review. Int J Mol Sci, 25, n. 22, p. 12453, 2024.
LEWIS, M. M.; YANG, Y.; WASILEWSKI, E.; CLARKE, H. A. et al. Chemical profiling of medical cannabis extracts. ACS Omega, 2, n. 9, p. 6091–6103, 2017.
LÓPEZ-OLMOS, C.; GARCÍA-VALVERDE, M. T.; HIDALGO, J.; FERRERIO-VERA, C. et al. Comprehensive comparison of industrial cannabinoid extraction techniques: Evaluation of the most relevant patents and studies at pilot scale. Front Nat Prod, 1, n. 3, p. 1043147, 2022.
MALABADI, R. B.; KOLKAR, K. P.; CHALANNAVAR, R. K. Cannabis sativa: Ethnobotany and phytochemistry. Int J Innov Sci Res Rev, 5, n. 2, p. 3990-3998, 2023.
MALABADI, R. B.; KOLKAR, K. P.; CHALANNAVAR, R. K.; BAIJNATH, H. Cannabis sativa: Extraction methods for phytocannabinoids—An update. World J Bio Pharm Health Sci, 20, n. 3, p. 18–58, 2024.
MALIK, K. A.; ZAFAR, Y. Intellectual property rights in plant biotechnology: a contribution to crop biosecurity. Asian Biotech Dev Rev, 8, n. 1, p. 7–43, 2005.
MARTINEZ, A. S.; LANARIDI, O.; STAGEL, K.; HALBWIRTH, H. et al. Extraction techniques for bioactive compounds of Cannabis sativa L.: A comprehensive review. Nat Prod Res, 40, n. 3, p. 676–717, 2023.
MOREIRA, E. M. F.; SOUSA, M. N. A. Therapeutic use of Cannabis sativa for the treatment of diseases. J Med Health Promot, 6, n. 1, p. 292-301, 2021.
ODIEKA, A. E.; OBUZOR, G. U.; OYEDEJI, O. O.; GONDWE, M. et al. The medicinal natural products of Cannabis sativa Linn.: A review. Molecules, 27, p. 1689, 2022.
PEGORARO, C. N.; NUTTER, D.; THEVENON, M.; RAMIREZ, C. L. Chemical profiles of Cannabis sativa medicinal oil using different extraction and concentration methods. Nat Prod Res, 35, n. 13, p. 2249-2252, 2019.
PENHA, E. M.; CARDOSO, D. D. S.; COELHO, L. P.; BUENO, A. M. A regulamentação de medicamentos derivados da Cannabis sativa no Brasil. Braz J Forensic Sci 9, n. 1, p. 125-145, 2019.
POTTER, D. J. A review of the cultivation and processing of cannabis (Cannabis sativa L.) for production of prescription medicines in the UK. Drug Test Anal, 6, n. 1, p. 31–38, 2013.
RANTAŠA, M.; SLAČEK, G.; KNEZ, Ž.; KNEZ MAREVCI, M. Supercritical fluid extraction of cannabinoids and their analysis by liquid chromatography and supercritical fluid chromatography: A short review. J CO2 Util, 86, n. 102907, p. 1-10, 2024.
REMBERG, B.; STEAD, A. H. Bulletin on Narcotics: Science in drug control: the role of laboratory and scientific expertise, Volume LVII, Nos. 1 and 2. New York: United Nations, 2007.
REN, G.; ZHANG, X.; LI, Y.; RIDOUT, K. et al. Large-scale whole-genome resequencing unravels the domestication history of Cannabis sativa. Sci Adv, 7, p. eabg2286, 2021.
RUSSO, E. B. Cannabinoids in the management of difficult to treat pain. Ther Clin Risk Manage, 4, n. 1, p. 245–259, 2008.
SAMPAIO, M. F.; AZEVEDO, P. H. C.; LUCENA, P. F.; PORTO, P. S. et al. O potencial terapêutico neurológico dos componente da Cannabis sativa Braz J Surg Clin Res, 34, n. 1, p. 52-60, 2021.
SCHILLING, S.; MELZER, R.; MCCABE, P. F. Cannabis sativa. Curr Biol, 30, n. 1, p. R1–R9, 2020.
SILVA, R. R.; ALMEIDA, D. G.; SANTOS, J. S. A utilização da Cannabis sativa para o tratamento da depressão. Res Soc Dev, 11, n. 14, p. e58111435786, 2022.
SUMONTRI, S.; EIAMART, W.; TADTONG, S.; SAMEE, W. Ultra-high-performance liquid chromatography–tandem mass spectrometry analysis of Δ9-tetrahydrocannabinol and cannabidiol in commercial Suk-Saiyasna herbal remedy: applying Hansen solubility parameters for sample extraction to ensure regulatory compliance. Pharmaceuticals, 17, n. 1502, p. 1-22, 2024.
TERNELLI, M.; BRIGHENTI, V.; ANCESCHI, L.; POTO, M. et al. Innovative methods for the preparation of medical cannabis oils with a high content of both cannabinoids and terpenes. J Pharm Biomed Anal, 186, p. 113296, 2020.
ŻUK-GOŁASZEWSKA, K.; GOŁASZEWSKI, J. Cannabis sativa L. – cultivation and quality of raw material. J Elem, 23, n. 3, p. 971-984, 2018.
