Produção de óxidos ternários nanoestruturados do tipo perovskitas puro e dopados com terras raras
DOI:
https://doi.org/10.34117/bjdv9n10-087Keywords:
perovskitas, método Pechini, terras rarasAbstract
O presente trabalho tem por objetivo a obtenção de Titanados do tipo C2Ti2O7, MTiO3 e MCTiO3 (M = Chumbo; C= íons metálicos de Terras Raras) a partir do método Pechini desenvolvidos na Universidade Federal do Norte do Tocantins (UFNT) com colaboradores visando agregar conhecimentos multidisciplinares no âmbito da produção de materias cerâmicos nanoestruturados com potenciais aplicação tecnológica. Os pós nanoestruturados de titanatos de Terras Raras (TRT) e de chumbo (PT) puros e dopados com íons metálicos de terras raras, a partir deste método químico, serão utilizados para o entendimento da influência destes dopantes na estrutura, bem como possível utilização, por exemplo, em dispositivos para conversão ascendente (UV-visível) e descendente (IV – visível). A partir da análise por difração de raios X (DRX) e espectroscopia Raman do PT puro e dopado com neodímio, podemos concluir que esses materiais foram obtidos e que o método é adequado para a realização das sínteses dos materiais.
References
S. Iakovlev, C.-H. Solterbeck, M. Es-Sounia, V. Zaporojtchenko, Rare-earth ions doping effects on the optical properties of sol–gel fabricate PT tihin film, Thin Solid Films 446 (2004) 50–53.
M. Mostafa, Z.A. Alrowaili, G.M. Rashwan, M.K. Gerges, Ferroelectric behavior and spectroscopic properties of La Modified lead titanate nanoparticles prepared by a sol-gel method, Heliyon 6 (2020) e03389.
M. C. Alves, S. O. Souza, J. C. Santos, M. J. B. Souza, A. M. G. Pedrosa, Estudo da influência das condições de síntese do método dos precursores poliméricos na formação de perovsquitas do tipo LaNiO3, Cerâmica 57 (2011) 305-309.
X.P. Liu, C.G. Meng, D.Z. Yang, F.X. Chen, New synthesis method to improve the properties of PbTiO3/NiTi composite film, Materials and Design 21 (2000) 517-519.
D. Bersani, P.P. Lottici, A. Montenero, S. Pigoni, G. Gnappi, Crystallization processes from amorphous PbTiO 3 powders prepared by the sol-gel method, Journal of Non-Crystalline Solids 192& 193 (1995) 490-493.
L.A. Shilkina, M.V. Talanov, S.I. Shevtsova, P.G. Grin’, A.T. Kozakov, S.I. Dudkina, A.V. Nikol’skii, L.A. Reznichenko, Isomorphism problems in lead-barium titanate, Journal of Alloys and Compounds 829 (2020) 154589.
Jun Wang, Xinchang Pang, Mufit Akinc, Zhiqun Lin, Synthesis and characterization of perovskite PbTiO3 nanoparticles with solution processability, J. Mater. Chem. 20 (2010) 5945–5949
N. Suresh Kumara, R. Padma Suvarnaa, K. Chandra Babu Naidub, Microwave heated lead cobalt titanate nanoparticles synthesized by sol_gel technique_Structural_ morphological_dielectric_impedance and ferroelectric properties, Materials Science & Engineering B 242 (2019) 23–30.
Th.E. Weirich, M. Winterer, S. Seifried, H. Hahn, H. Fuess, Rietveld analysis of electron powder diffraction data from nanocrystalline anatase, TiO2, Ultramicroscopy 81 (2000) 263-270.
L. Gracia, J. Andrés, V.M. Longo, J.A. Varela, E. Longo, A theoretical study on the photoluminescence of SrTiO3, Chemical Physics Letters 493 (2010) 141–146
T. Takahashi, Lead titanate ceramics with large piezoelectric anisotropy and their applications, Japan: N. p., 1991. Web.
H. Takeuchi, S. Jyomura, E. Yamamoto, Y. Ito, Electromechanical properties of (Pb, Ln) (Ti, Mn)O3 ceramics (Ln - rare earths), The Journal of the Acoustical Society of America 72, (1982) 1114.
Y. Yamashita, K. Yokoyama, H. Honda, T. Takahashi, (Pb, Ca) ((Co1/2W1/2), Ti)O3 Piezoelectric Ceramics and Their Applications, Japanese Journal of Applied physics, 20 (1981) 183-187.
S. Chopra, S. Sharma, T.C. Goel, R.G. Mendiratta, Electrical and optical properties of sol–gel derived La modified PbTiO3 thin films, Electrical and optical properties of sol–gel derived La modified PT thin film, Applied Surface Science 236 (2004) 321–327.
J. Frantti, J. Lappalainen, V. Lantto, S. Nishio, M. Kakihana, Low-Temperature Raman Studies of Pb(ZrxTi1−x)O3 and Pb1−3 y/2NdyTiO3 Ceramics, Jpn. J. Appl. Phys. 38 (1999) 5679–5682.
E.C. Paris, M.F.C. Gurgel, T.M. Boschi, M.R. Joya, P.S. Pizani, A.G. Souza, E.R. Leite, J.A. Varela, E. Longo, Investigation on the structural properties in Er-doped PbTiO3 compounds: A correlation between experimental and theoretical results, Journal of Alloys and Compounds 462 (2008) 157–163.
E. R. Leite, E. C. Paris, and E. Longo, J. A Varela, Direct Amorphous-to-Cubic Perovskite Phase Transformation for Lead Titanate, J. Am. Ceram. Soc., 83 [6] (2000) 1539–1541.
F. M. Pontes, E. J. H. Lee, E. R. Leite, E. Longo, High dielectric constant of SrTiO3 thin films prepared by chemical process, Journal of Materials Science, (2000) 4783 – 4787.
Suresh Kumar, Gary L. Messing, and William B. White, Metal Organic Resin Derived Barium Titanate: I, Formation of Barium Titanium Oxycarbonate Intermediate, Journal of the American Ceramic Society, 76(3), 617–624.
H. Lin, G. Meredith, S. Jiang, X. Peng, Tao Luo, and N. Peyghambarian, Optical transitions and visible upconversion in Er3¿ doped niobic tellurite glass,
F.C.D. Lemos, D.M.A. Melo, J.E.C. da Silva, Photoluminescence of Er3þ doped in PbTiO3 perovskite-type obtained via polymeric precursor method, Optics Communications 231 (2004) 251–255.
F.C.D. Lemos, D.M.A. Melo, J.E.C. da Silva, Up-conversion luminescence in Er3+/Yb3+-codoped PbTiO3 perovskite obtained via Pechini method, Materials Research Bulletin 40 (2005) 187–192.
H. Guo, N. Dong, Min Yin, W. Zhang, L. Lou, S. Xia, Green and red upconversion luminescence in Er3+-doped and Er3+/Yb3+-codoped SrTiO3 ultrafine powders, Journal of Alloys and Compounds 415 (2006) 280–283.
J. Mrázek, M Surýnek, S. Bakardjieva, J. Buršík, J. Proboštová, I. Kašík, Luninfescence properties of nanocrystalline europium titanate Eu2Ti2O7, Journal of Alloys and Compounds Volume 645, 5 (2015) 57-63.
B. S. Kumar, R. N. Perumal, C. Venkateswaran, Concurrence of ferroelectric, dielectric and magnetic behaviour in Tb2Ti2O7 pyrochlore, Physics Letters A Volume 389, 15 (2021), 127085.
Pechini, M. P.; U. S. Patent No 3330697, July 11 (1967).
A. Safari, Y. H. Lee, A. Halliyal, R. E. Newnham, Piezoelectric composites prepared by co precipitated PbTiО3 Powder, American Ceramic Society Bulletin 66, (1987) 668-670.
T. Putjuso, S. Maensiri, S. Hunpratub, E. Swatsitang, La0.5Sr0.5TiO3 nanopowders prepared by the hydrothermal method, Materials Research Bulletin 47, (2012) 2270–2276.
M. R. Mohammadi, D. J. Fray, Sol-gel derived nanocrystalline and mesoporous barium strontium titanate prepared at room temperature, Particuology 9 (2011) 235–242.
J. J. Kingsley, K. C. Patil, A novel combustion process for the synthesis of fine particle α-alumina and related oxide materials, Materials Letters 6 (1988) 427–432.
N. Rakov, R. B. Guimarães, D. F. Franceschini, G. S. Maciel, Er:SrF2 luminescent powders prepared by combustion synthesis, Materials Chemistry and Physics 135 (2012) 317-321.
S. Bhaskar, S.B. Majumder, M. Jain, P.S. Dobal, R.S. Katiyar, Studies on the structural, microstructural and optical properties of sol–gel derived lead lanthanum titanate thin films, Mater. Sci. Eng. B, 87 (2001) 178.
A.H. Pinto, F.L. Souza, A.J. Chiquito, E. Longo, E.R. Leite, E.R. Camargo, Characterization of dense lead lanthanum titanate ceramics prepared from powders synthesized by the oxidant peroxo method, Mater. Chem. Phys. 124 (2010) 1051–1056.
X. Zeng, Y. Liu, X. Wang, W. Yin, L. Wang, H. Guo, Preparation of nanocrystalline PbTiO3 by accelerated sol–gel process, Mater. Chem. Phys. 77, 1 (2002) 209.
