BIO-FADEN 2.0 Pavilion: experimental study of algorithmic-generative design and digital fabrication with 3D printing of a bionic pavilion prototype in the Midwest Region of Brazil
BIO-FADEN 2.0 Pavilhão: estudo experimental de projeto algorítmico-gerativo e fabricação digital com impressão 3D de um protótipo de pavilhão biônico na Região Centro-Oeste do Brasil
DOI:
https://doi.org/10.34117/bjdv8n9-007Keywords:
bionic, generative design, digital fabrication, 3D printing, pavilionAbstract
This research has as main objective to determine the possibilities and limitations of digital design and digital fabrication by 3D printing of a prototype of bionic pavilion with non-Euclidean geometric shapes in reduced size inspired by fruits present in the MidWest Region of Brazil. The work was structured in 3 stages: Rationale, Materials and Logistic, and Experimentation. The Rationale consisted of a literature review on the concepts of: bionics, generative-algorithmic design, digital fabrication, 3D printing and prototyping. The Materials and Logistics stage consisted of the presentation and classification into categories of materials and the logistics that were usedTthe experiment consisted of 4 phases: Graphic code and 3D digital modeling of the bionic pavilion; operationalization of digital fabrication; selection of 3D printing digital fabrication technology and; digital fabrication by 3D printing. The main result of the research is that digital technologies - rhinoceros 5.0 software, grasshopper software - allow to design a prototype of a pavilion of complex shape or of small size inspired by natural structures.
References
Alvarez, M.; Wagner, H. J.; Groenewolt, A.; Krieg, O. D.; Kyjanek, O.; Sonntag, D.; Bechert, S.; Aldinger, L.; Menges, A.; Knippers, J. (2019) The Buga Wood Pavilion. In: ACADIA. p. 490-499.
Agkathidis, A. (2015) Generative Design Methods; Implementing Computational Techniques in Undergraduate Architectural Education. In: eCAADe 33. CAAD Education - Concepts - Volume 2 p. 47-55.
Al-maliki, J. Q.; Al-maliki, A. J. Q. (2015) The Processes and Technologies of 3D Printing. International Journal of Advances in Computer Science and Technology. vol. 4 No.10, Oct. 2015. ISSN 2320 2602. http://www.warse.org/IJACST/static/pdf/file/ijacst024102015.pdf
Buonamici, F.; Carfagni, M.; Furferi, R.; Volpe, Y.; Governi, L. (2020) Generative Design: Na Explorative Study. Computer-Aided Design & Applications, 18(1), 2021, 144-155. https://doi.org/10.14733/cadaps.2021.144-155
Crucible. (2014) 3D printing for manufacture: a basic design guide. http://www.crucibledesign.co.uk
Dambrosio, N.; Bodea, S.; Zechmeister, Ch.; Koslowski, V. (2019) Buga Fibre Pavilion: Towards an Architectural application of novel Fber Composite Building Systems. In: ACADIA. p. 140-149.
Darja Moskvina, I. S. (2020) Generative design for performance-based building envelope design. 100 f. (Master in Construction Management and Building Informatics). Aalborg University.
Dörstelmann, M.; Parascho, S.; Prado, M.; Menges, A. (2014) Integrative Computational Design Methodologies for Modular Architectural Fiber Composite Morphologies. In: ACADIA. p. 219-228.
Erasmus3D+. (2017) 3D printing technical guide.
Gebhardt, A.; Fateri, M. (2013) 3D printing and its applications. http://www.dipp.nrw.de/service/dppl/
Guillen-Salas, J. C.; Silva, N. F.; Kallas, L. M. E. (2020) Pavilion BIO-FADEN 1.0: Experimental study of design and manufacture with digital technologies of bionic prototype inspired by the fruit peels of fruit species present in the Central-Western Region of Brazil, p. 847-854 . In: Congreso SIGraDi. São Paulo: Blucher, 2020.ISSN 2318-6968, DOI 10.5151/sigradi2020-115
Guillén-Salas, J. C.; Silva, N. F. (2021) Digital Fabrication Experimentations with Complex Form Modular Bionic Building Envelope with 3D Printing and Robotics Technology. In: H. RODRIGUES, et al. (eds) Sustainability and Automation in Smart Constructions, Advances in Science, Technology & Innovation. Springer Nature Switzerland AG 2021. p. 143-155. https://doi.org/10.1007/978-3-030-35533-3_18
Guillen Salas, J. C. (2020) Projetação e Fabricação de Pavilhão Biomimético de Forma Complexa, Celular e Responsivo com Tecnologias Digitais e Robótica em Brasília – DF. 377 f. Tese (Doutorado em Arquitetura e Urbanismo) – Programa de Pós-Graduação de Arquitetura e Urbansimo, Universidade de Brasília, Brasília - DF, Brasil.
Henriques, G. C. (2012) TetraScript: A Responsive Pavilion, from Generative Design to Automation. International Journal of Architectural Computing, issue 01, volume 10. p. 87-104.
INTRINSIM. (2019) A Vision for Generative Design. 34 p.
Mogas-Soldelila, L.; Duro-Royo, J.; Lizardo, D.; Kayser, M.; Patrick, W.; Shrama, S.; Keating, S.; Klein, J.; Inamura, Ch.; Oxman, N. (2015) Designing the Ocean Pavilion: Biomaterial Templating of Structural, Manufacturing, and Environmental Performance.
Oxman, N.; Laucks, J.; Kayser, M.; Duro-Royo, J.; Gonzales-Uribe, C. Silk Pavilion: A Case Study in Fibre-Based Digital Fabrication. In: Gramazio, F.; Kohler, M.; Langenberg, S. (eds) (2014) Fabricate: Negotiating Design $ Making. p. 245-255.
Panda, B.; Tan, M. J.; Gibson, I.; Chua, C. K. (2016) The disruptive evolution of 3D printing. Proceedings of the 2nd International Conference on Progress in Additive Manufacturing, 152‑157. https://hdl.handle.net/10356/84579
Ramya, A.; Vanapalli, S. L. (2016) 3D printing technologies in various applications. International Journal of Mechanical Engineering and Technology (IJMET). Volume 7, Issue 3, May–June, pp.396–409. http://www.iaeme.com/IJMET/issues.asp?JType=IJMET&VType=7&IType=3
Reichert, S.; Menges, A.; Correa, D. (2015) Meteorosensitive architecture: Biomimetic building skins based on materially embedded and hygroscopically enabled responsiveness. Computer-Aided Design 60. p. 50–69. https://doi.org/10.1016/j.cad.2014.02.010
Shahrubudin, N.; Lee, T. C.; Ramlan, R. (2019) An overview on 3D printing technology: technological, materials, and applications. ScienceDirect. Procedia Manufacturing 35, 1286–1296.
THE 3D PRINTING “Revolution” Na Imminent Reality or a Misunderstood Fantasy?. 2017.
Westerveld, C. E. (2021) Generative Design: Recommended actions to smooth the way for production of generative desigs with additive manufacturing. Industrial Design Engineering, Engineering Technology, University of Twenty. 127 p.
D PRINTING for the Bioscience Classroom. History of 3D Printing: The Free Beginner’s Guide.. 2016. http://3dprintingindustry.com/3d-printing-basics-free-beginners-guide/history
