Cobalt (II) used as a catalyst to drying properties of healing agents for self-healing coatings / Cobalto (II) utilizado como catalisador de propriedades de secagem de agentes de cura para revestimentos auto-regenerativos
DOI:
https://doi.org/10.34117/bjdv8n2-085Keywords:
Cobalt catalyst, Oxidative polymerization, Self-healing coatings, Vegetable oils.Abstract
Vegetable oils have been largely used as healing agents for self-healing coatings, which in turn, can recover their physical integrity upon damage due to oil film formation resulted of its oxidative polymerization process. Linseed oil (LO) and chia oil (CO) are able to form films because of their air-drying properties and high polyunsaturated fatty acids content. In this work, drying properties of CO and LO with and without cobalt (II) octoate, as a catalyst for the oxidative polymerization, were quantitatively estimated over time by Fourier-Transform Infrared Spectroscopy (FTIR). The CO drying property showed 47% higher than LO and the catalyst has successfully accelerated the oxidative polymerization of both oils in 95%. Microcapsules containing both pure and catalyzed oils were prepared, mixed into epoxy resin, and applied onto AISI 1020 steel samples. Their healing effect was evaluated through a simulated scratch and submitted to electrochemical tests and imaging.
References
White, S. R., Sottos, N. R., Geubelle, P. H., Moore, J. S., Kessler, M. R., Sriram, S. R., ... & Viswanathan, S. (2001). Autonomic healing of polymer composites. Nature, 409(6822), 794-797. https://doi.org/10.1038/35057232.
Silva, A. C. M., Moghadam, A. D., Singh, P., & Rohatgi, P. K. (2017). Self-healing composite coatings based on in situ micro–nanoencapsulation process for corrosion protection. Journal of Coatings Technology and Research, 1-29. https://doi.org/10.1007/s11998-016-9879-0.
Zhang, F., Ju, P., Pan, M., Zhang, D., Huang, Y., Li, G., & Li, X. (2018). Self-healing mechanisms in smart protective coatings: a review. Corrosion Science, 144, 74-88. https://doi.org/10.1016/j.corsci.2018.08.005.
An, S., Lee, M. W., Yarin, A. L., & Yoon, S. S. (2018). A review on corrosion-protective extrinsic self-healing: Comparison of microcapsule-based systems and those based on core-shell vascular networks. Chemical Engineering Journal, 344, 206-220. https://doi.org/10.1016/j.cej.2018.03.040.
Ataei, S., Khorasani, S. N., & Neisiany, R. E. (2019). Biofriendly vegetable oil healing agents used for developing self-healing coatings: A review. Progress in Organic Coatings, 129, 77-95. https://doi.org/10.1016/j.porgcoat.2019.01.012.
Shisode, P. S., Patil, C. B., & Mahulikar, P. P. (2018). Preparation and characterization of microcapsules containing soybean oil and their application in self-healing anticorrosive coatings. Polymer-Plastics Technology and Engineering, 57(13), 1334-1343. https://doi.org/10.1080/03602559.2017.1381248.
Ataei, S., Hassan, A., Azari, P., Pingguan-Murphy, B., Yahya, R., Basirun, W. J., & Shahabudin, N. (2020). Electrosprayed PMMA microcapsules containing green soybean oil-based acrylated epoxy and a thiol: a novel resin for smart self-healing coatings. Smart Materials and Structures, 29(8), 085037. DOI:10.1088/1361-665X/ab9754.
Baharom, Z., Idris, M. I., Lee, T. C., & Abdullah, H. Z. (2020). Comparative Study on Microencapsulated of Natural and Waste Sunflower Oil as Self-Healing Agent. In Materials Science Forum (Vol. 1010, pp. 439-444). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/MSF.1010.439
Silva, A. C. M., Renzetti, R. A., Sakita, A. M. P., Lavall, R. L., de Sousa Andrada, A., Rohatgi, P. K., & Silva, M. C. D. (2021). Chia oil performance as healing agent for epoxy resin-based smart coatings. Polymer Bulletin, 1-17. https://doi.org/10.1007/s00289-021-03924-2.
Lima, G. E. S., Nunes, E. V., Dantas, R. C., Meneghetti, M. R., & Meneghetti, S. M. P. (2015). Systematic investigation of the oxidative polymerization of linseed oil catalyzed by Co (II), Mn (II), and Fe (II) complexes with chelating nitrogen ligands. European Journal of Lipid Science and Technology, 117(2), 229-234. https://doi.org/10.1002/ejlt.201400091.
Mallégol, J., Lemaire, J., & Gardette, J. L. (2000). Drier influence on the curing of linseed oil. Progress in organic coatings, 39(2-4), 107-113. https://doi.org/10.1016/S0300-9440(00)00126-0.
González, M. G., Cabanelas, J. C., & Baselga, J. (2012). Applications of FTIR on epoxy resins-identification, monitoring the curing process, phase separation and water uptake. Infrared Spectroscopy-Materials Science, Engineering and Technology, 2, 261-284.
Behzadnasab, M., Esfandeh, M., Mirabedini, S. M., Zohuriaan-Mehr, M. J., & Farnood, R. R. (2014). Preparation and characterization of linseed oil-filled urea–formaldehyde microcapsules and their effect on mechanical properties of an epoxy-based coating. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 457, 16-26. https://doi.org/10.1016/j.colsurfa.2014.05.033.
Weiss, K. D. (1997). Paint and coatings: A mature industry in transition. Progress in polymer science, 22(2), 203-245.
de la Paz Miguel, M., Ollier, R., Alvarez, V., & Vallo, C. (2016). Effect of the preparation method on the structure of linseed oil-filled poly (urea-formaldehyde) microcapsules. Progress in Organic Coatings, 97, 194-202. https://doi.org/10.1016/j.porgcoat.2016.04.026.
Brown, E. N., Kessler, M. R., Sottos, N. R., & White, S. R. (2003). In situ poly (urea-formaldehyde) microencapsulation of dicyclopentadiene. Journal of microencapsulation, 20(6), 719-730. https://doi.org/10.3109/02652040309178083.
