Selective recovery of zinc from steelmaking dust via sulfation and hydrometallurgical processing: a purification strategy for high-quality zinc sulfate production
DOI:
https://doi.org/10.34115/basrv9n2-002Keywords:
Electric arc furnace dust (EAFD), zinc recovery, sulfation roasting, hydrometallurgical processing, selective leaching, zinc sulfate crystallization, hazardous waste valorizationAbstract
Electric arc furnace dust (EAFD) is a hazardous steelmaking by-product rich in valuable metals such as Zn, Fe, Mn, Cu, and Pb. This study proposes a selective zinc recovery route based on thermal sulfation followed by hydrometallurgical leaching, purification, and crystallization. Sulfation at moderate temperatures converted metal oxides into soluble or insoluble sulfates, enabling selective Zn dissolution. Leaching conducted at 60 °C and pH 2–3 achieved Zn extraction of 96.3 ± 2.3%. Sequential removal of Fe and Cu impurities enabled the crystallization of high-purity zinc sulfate (ZnSO₄·xH₂O) with 32.49 wt% Zn and <0.005 wt% impurities. Insoluble lead and iron compounds (PbSO₄ and Fe₂O₃) were recovered as secondary products. The process offers an efficient, low-acid consumption route for EAFD valorization, generating high-quality ZnSO₄ and minimizing environmental impact.
References
Khaidarov TB, Danha G, Muvhiiwa RF, Muzenda E, Mbohwa C. An innovative approach toward enhancing the environmental and economic sustainability of resource recovery from hazardous Zn bearing dusts from electric arc furnace steelmaking. Sustainability. 2025;17(6):2773. doi:10.3390/su17062773
Wang K, Xue Y, Zhao Z, Pan S, Shi H. Influencing factors and mechanisms of zinc recovery from electric arc furnace dust—microwave assisted carbothermic reduction. Metals. 2025;15(4):437. doi:10.3390/met15040437
Ju J, Peng X, Liu M, Zuo J, Chen H. High efficiency separation and recovery of Zn and Fe from EAF dust using (NH₄)₂SO₄ roasting–water leaching. Journal of Cleaner Production. 2025; 298:126788. doi: 10.1016/j.jclepro.2021.126788
Xue Y, Li Y, Zhang M, Chen D, Zhao Z. Recovery of zinc and iron from steel mill dust—A process review. International Journal of Mining, Metallurgy & Materials. 2022;29(1):177–193. doi:10.1007/s40831-020-00306-2
Huang J, Li Y, Zhang M, Chen D, Xue Y. Oxygen assisted zinc recovery from electric arc furnace dust. Transactions of Nonferrous Metals Society of China. 2024;34(2):2837–2849. doi:10.1007/s12613-024-2837-4
Palimąka P, Pietrzyk S, Stępień M, Gargul K. Hydrometallurgical recovery of zinc from electric arc furnace dust using aqueous NaOH. Metals. 2018;8(7):547. doi:10.3390/met8090547
Karimi S, Kamali Rajaei M, Ganjali MR, Norouzi P. Recovery of zinc from low grade steelmaking dust using integrated hydrometallurgical process. Process Safety and Environmental Protection. 2024; 164:128. doi: 10.1016/j.jhazmat.2024.128
Rinne M, Mustajoki J, Oksanen J, Kalliomäki L. Alternative method for treating electric arc furnace dust: a review. Journal of Cleaner Production. 2022; 350:131936. doi:10.1007/s40831-022-00531-x
Langová Š, Leško J, Matýsek D. Zinc recovery from steel making wastes by acid pressure leaching. Hydrometallurgy. 2010; 100:79–86. doi: 10.1016/j.hydromet.2009.11.015
Xie Z, Li W, Zhao X, Wang J, Liu Q. Mineral phase reconstruction and separation behavior in zinc ferrite type dust. Materials. 2023;16(18):441. doi:10.3390/ma10180441
Jha MK, Kumar V, Singh RJ. Review of hydrometallurgical recovery of zinc from industrial wastes. Hydrometallurgy. 2001;66(1):113–129. doi:10.1016/S0304-3894(00)00095-1
Siame MC, Kaoma J, Hlabangana N, Danha G. An attainable region approach for the recovery of iron and zinc from electric arc furnace dust. South African Journal of Chemical Engineering. 2019; 27:35–42. doi:10.1016/j.sajce.2019.04.005
Binnemans K, Jones PT, Walton A. Hydrocyclone separation for Zn recovery from blast furnace dust. Hydrometallurgy. 2020; 193:105362. doi:10.1007/s40831-020-00306-2
Wang H, Li J, Gao J, Sun Y, Zhang Y.. Hydrothermal extraction of zinc from ZnFe₂O₄ in electric arc furnace dust using FeCl₃. International Journal of Mining, Metallurgy & Materials. 2016;23(2):146–153. doi:10.1007/s12613-016-1221-4
Kim JH, Lee KJ, Kim KY, Lee JH. Recycling of steelmaking electric arc furnace dust into aqueous cyan ceramic ink for inkjet printing process and its printability. J Eur Ceram Soc. 2021;41(9):5172–5181. doi: 10.1016/j.jeurceramsoc.2021.02.077
